A new branch of PSWinReporting is slowly coming, and I thought it would be the best time to have a final article about it with all configuration options available for those that will want to stay using PSWinReporting from Legacy branch. The idea is that you may have it working in your systems and it's good enough for you. You may not want to change it, and with New Hope, the changes are so big it's a rewrite.
For those that see this first time, PSWinReporting can scan Active Directory Domain Controllers, or Event Log Forwarders and prepare nicely formatted HTML report, send that data to Microsoft Teams, Slack or/and Microsoft SQL.
It has two working modes. One mode is the ability to scan events on demand on hourly, daily, weekly, monthly (and so on) periods. You can treat it as a sort of post-fact report that you send to yourself or your manager or service desk to review what happened and whether it was approved or not. You can track group membership changes, user changes and so on knowing precisely what happened when it happened and who did it. It's able to write data to HTML, Microsoft Excel, CSV, and Microsoft SQL. It's either sending that data with Email or save it to disk for later (with the exception of SQL of course). The second mode is the live mode. It requires Event Forwarding to be set up, but it allows to send events to Microsoft Teams, Slack and Microsoft SQL as events happen.
Below is a standard PowerShell Configuration/Script that you would use in your Task Scheduler, executed every day. I usually run this right after midnight to get a report for myself in the morning when I start my work. Make sure to change report paths, email parameters and which periods are you interested in. Please review PSWinReporting Module page for links to other blog posts about this configuration if you have any questions. I've written 7 or so articles about it, and that should cover most of your questions about it.
$EmailParameters = @{
EmailFrom = "notifications@domain.com"
EmailTo = "przemyslaw.klys@domain.com, admin@domain.com"
EmailCC = ""
EmailBCC = ""
EmailReplyTo = ""
EmailServer = "smtp.office365.com"
EmailServerPassword = "YourPassword"
EmailServerPasswordAsSecure = $false
EmailServerPasswordFromFile = $false
EmailServerPort = "587"
EmailServerLogin = "notifications@domain.com"
EmailServerEnableSSL = 1
EmailEncoding = "Unicode"
EmailSubject = "[Reporting] Event Changes for period <<DateFrom>> to <<DateTo>>"
EmailPriority = "Low" # Normal, High
}
$FormattingParameters = @{
CompanyBranding = @{
Logo = 'https://evotec.xyz/wp-content/uploads/2015/05/Logo-evotec-012.png'
Width = '200'
Height = ''
Link = 'https://evotec.xyz'
Inline = $false
}
FontFamily = 'Calibri Light'
FontSize = '9pt'
FontHeadingFamily = 'Calibri Light'
FontHeadingSize = '12pt'
FontTableHeadingFamily = 'Calibri Light'
FontTableHeadingSize = '9pt'
FontTableDataFamily = 'Calibri Light'
FontTableDataSize = '9pt'
Colors = @{
# case sensitive
Red = 'removed', 'deleted', 'locked out', 'lockouts', 'disabled', 'Domain Admins', 'was cleared'
Blue = 'changed', 'changes', 'change', 'reset'
Green = 'added', 'enabled', 'unlocked', 'created'
}
Styles = @{
# case sensitive
B = 'status', 'Domain Admins', 'Enterprise Admins', 'Schema Admins', 'was cleared', 'lockouts' # BOLD
I = '' # Italian
U = 'status'# Underline
}
Links = @{
}
}
$ReportOptions = @{
JustTestPrerequisite = $false # runs testing without actually running script
AsExcel = $false # attaches Excel to email with all events, required ImportExcel module
AsCSV = $false # attaches CSV to email with all events,
AsHTML = $true # puts exported data into email directly with all events
SendMail = $false
SendMailOnlyOnEvents = $false
OpenAsFile = $true
KeepReports = $true # keeps files after reports are sent (only if AssExcel/AsCSV are in use)
KeepReportsPath = "C:\Support\Reports\ExportedEvents" # if empty, temp path is used
FilePattern = "Evotec-<currentdate>.<extension>"
FilePatternDateFormat = "yyyy-MM-dd-HH_mm_ss"
RemoveDuplicates = $true #
AsSql = @{
Use = $true
SqlServer = 'EVOWIN'
SqlDatabase = 'SSAE18'
SqlTable = 'dbo.[Events]'
# Left side is data in PSWinReporting. Right Side is ColumnName in SQL
# Changing makes sense only for right side...
SqlTableCreate = $true
SqlTableAlterIfNeeded = $false # if table mapping is defined doesn't do anything
SqlCheckBeforeInsert = 'EventRecordID', 'DomainController' # Based on column name
SqlTableMapping = [ordered] @{
'Event ID' = 'EventID,[int]'
'Who' = 'EventWho'
'When' = 'EventWhen,[datetime]'
'Record ID' = 'EventRecordID,[bigint]'
'Domain Controller' = 'DomainController'
'Action' = 'Action'
'Group Name' = 'GroupName'
'User Affected' = 'UserAffected'
'Member Name' = 'MemberName'
'Computer Lockout On' = 'ComputerLockoutOn'
'Reported By' = 'ReportedBy'
'SamAccountName' = 'SamAccountName'
'Display Name' = 'DisplayName'
'UserPrincipalName' = 'UserPrincipalName'
'Home Directory' = 'HomeDirectory'
'Home Path' = 'HomePath'
'Script Path' = 'ScriptPath'
'Profile Path' = 'ProfilePath'
'User Workstation' = 'UserWorkstation'
'Password Last Set' = 'PasswordLastSet,[datetime]'
'Account Expires' = 'AccountExpires,[datetime]'
'Primary Group Id' = 'PrimaryGroupId'
'Allowed To Delegate To' = 'AllowedToDelegateTo'
'Old Uac Value' = 'OldUacValue'
'New Uac Value' = 'NewUacValue'
'User Account Control' = 'UserAccountControl'
'User Parameters' = 'UserParameters'
'Sid History' = 'SidHistory'
'Logon Hours' = 'LogonHours'
'OperationType' = 'OperationType'
'Message' = 'Message'
'Backup Path' = 'BackupPath'
'Log Type' = 'LogType'
'AddedWhen' = 'EventAdded,[datetime],null' # ColumnsToTrack when it was added to database and by who / not part of event
'AddedWho' = 'EventAddedWho' # ColumnsToTrack when it was added to database and by who / not part of event
'Gathered From' = 'GatheredFrom'
'Gathered LogName' = 'GatheredLogName'
}
}
DisplayConsole = @{
ShowTime = $true
LogFile = "$Env:USERPROFILE\Desktop\PSWinReporting-Manual.log"
TimeFormat = "yyyy-MM-dd HH:mm:ss"
}
Debug = @{
DisplayTemplateHTML = $false
Verbose = $false
}
}
$ReportTimes = @{
# Report Per Hour
PastHour = $false # if it's 23:22 it will report 22:00 till 23:00
CurrentHour = $false # if it's 23:22 it will report 23:00 till 00:00
# Report Per Day
PastDay = $false # if it's 1.04.2018 it will report 31.03.2018 00:00:00 till 01.04.2018 00:00:00
CurrentDay = $false # if it's 1.04.2018 05:22 it will report 1.04.2018 00:00:00 till 01.04.2018 00:00:00
# Report Per Week
OnDay = @{
Enabled = $false
Days = 'Monday'#, 'Tuesday'
}
# Report Per Month
PastMonth = @{
Enabled = $false # checks for 1st day of the month - won't run on any other day unless used force
Force = $false # if true - runs always ...
}
CurrentMonth = $true
# Report Per Quarter
PastQuarter = @{
Enabled = $false # checks for 1st day fo the quarter - won't run on any other day
Force = $false
}
CurrentQuarter = $false
# Report Custom
CurrentDayMinusDayX = @{
Enabled = $false
Days = 7 # goes back X days and shows just 1 day
}
CurrentDayMinuxDaysX = @{
Enabled = $false
Days = 3 # goes back X days and shows X number of days till Today
}
CustomDate = @{
Enabled = $false
DateFrom = get-date -Year 2018 -Month 03 -Day 19
DateTo = get-date -Year 2018 -Month 03 -Day 23
}
Everything = $false
}
$ReportDefinitions = @{
TimeToGenerate = $false
ReportsAD = @{
Servers = @{
UseForwarders = $true # if $true skips Automatic/OnlyPDC/DC for reading logs. However it uses Automatic to deliver size of logs so keep Automatic to $true
ForwardServer = $ENV:COMPUTERNAME
ForwardEventLog = 'ForwardedEvents'
UseDirectScan = $true
Automatic = $true
OnlyPDC = $false
DC = ''
}
ArchiveProcessing = @{
Use = $false
Directories = [ordered] @{
Use = $false
MyEvents = 'E:\EventLogs' #
#MyOtherEvent = 'C:\MyEvent1'
}
Files = [ordered] @{
Use = $false
#File1 = 'E:\EventLogs\Archive-Security-2018-09-14-22-13-07-710.evtx'
}
}
EventBased = @{
UserChanges = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4720, 4738
LogName = 'Security'
IgnoreWords = @{}
}
UserStatus = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4722, 4725, 4767, 4723, 4724, 4726
LogName = 'Security'
IgnoreWords = @{}
ExportToSql = @{
Use = $true
SqlServer = 'EVOWIN'
SqlDatabase = 'SSAE18'
SqlTable = 'dbo.[EventsUserStatus]'
# Left side is data in PSWinReporting. Right Side is ColumnName in SQL
# Changing makes sense only for right side...
SqlTableCreate = $true
SqlTableAlterIfNeeded = $false # if table mapping is defined doesn't do anything
SqlCheckBeforeInsert = 'EventRecordID', 'DomainController' # Based on column name
SqlTableMapping = [ordered] @{
'Event ID' = 'EventID,[int]'
'Who' = 'EventWho'
'When' = 'EventWhen,[datetime]'
'Record ID' = 'EventRecordID,[bigint]'
'Domain Controller' = 'DomainController'
'Action' = 'Action'
'Group Name' = 'GroupName'
'User Affected' = 'UserAffected'
'Member Name' = 'MemberName'
'Computer Lockout On' = 'ComputerLockoutOn'
'Reported By' = 'ReportedBy'
'SamAccountName' = 'SamAccountName'
'Display Name' = 'DisplayName'
'UserPrincipalName' = 'UserPrincipalName'
'Home Directory' = 'HomeDirectory'
'Home Path' = 'HomePath'
'Script Path' = 'ScriptPath'
'Profile Path' = 'ProfilePath'
'User Workstation' = 'UserWorkstation'
'Password Last Set' = 'PasswordLastSet,[datetime]'
'Account Expires' = 'AccountExpires,[datetime]'
'Primary Group Id' = 'PrimaryGroupId'
'Allowed To Delegate To' = 'AllowedToDelegateTo'
'Old Uac Value' = 'OldUacValue'
'New Uac Value' = 'NewUacValue'
'User Account Control' = 'UserAccountControl'
'User Parameters' = 'UserParameters'
'Sid History' = 'SidHistory'
'Logon Hours' = 'LogonHours'
'OperationType' = 'OperationType'
'Message' = 'Message'
'Backup Path' = 'BackupPath'
'Log Type' = 'LogType'
'AddedWhen' = 'EventAdded,[datetime],null' # ColumnsToTrack when it was added to database and by who / not part of event
'AddedWho' = 'EventAddedWho' # ColumnsToTrack when it was added to database and by who / not part of event
# 'Gathered From' = 'GatheredFrom'
# 'Gathered LogName' = 'GatheredLogName'
}
}
}
UserLockouts = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4740
LogName = 'Security'
IgnoreWords = @{}
}
UserLogon = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 4624
LogName = 'Security'
IgnoreWords = @{}
}
GroupMembershipChanges = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4728, 4729, 4732, 4733, 4756, 4757, 4761, 4762
LogName = 'Security'
IgnoreWords = @{}
}
GroupCreateDelete = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4727, 4730, 4731, 4734, 4759, 4760, 4754, 4758
LogName = 'Security'
IgnoreWords = @{}
}
GroupPolicyChanges = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 5136, 5137, 5141
LogName = 'Security'
IgnoreWords = @{}
}
LogsClearedSecurity = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 1102
LogName = 'Security'
IgnoreWords = @{}
ExportToSql = @{
Use = $false
SqlServer = 'EVO1'
SqlDatabase = 'SSAE18'
SqlTable = 'dbo.[EventsLogsClearedSecurity]'
SqlTableCreate = $true
SqlTableAlterIfNeeded = $false # if table mapping is defined doesn't do anything
SqlCheckBeforeInsert = 'EventRecordID', 'DomainController' # Based on column nameg
}
}
LogsClearedOther = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 104
LogName = 'System' # Source: EventLog, Task: 'Log clear'
IgnoreWords = @{}
}
EventsReboots = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 1001, 1018, 1, 12, 13, 42, 41, 109, 1, 6005, 6006, 6008, 6013
LogName = 'System'
IgnoreWords = @{}
}
ComputerCreatedChanged = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4741, 4742 # created, changed
LogName = 'Security'
IgnoreWords = @{}
}
ComputerDeleted = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4743 # deleted
LogName = 'Security'
IgnoreWords = @{}
}
}
Custom = @{
EventLogSize = @{
Enabled = $true
EnabledSqlGlobal = $false
Logs = 'Security', 'Application', 'System'
SortBy = ''
}
ServersData = @{
Enabled = $true
EnabledSqlGlobal = $false
}
FilesData = @{
Enabled = $true
}
}
}
}
Import-Module PSWinReporting -Force
### Starts Module (Requires config above)
$startADReportingSplat = @{
ReportDefinitions = $ReportDefinitions
ReportTimes = $ReportTimes
FormattingParameters = $FormattingParameters
ReportOptions = $ReportOptions
EmailParameters = $EmailParameters
}
Start-ADReporting @startADReportingSplatIn this article, I wanted to focus mostly on the SQL part of the configuration as it was neglected in the last article I wrote and was half ready. It works in two ways. You can use it at a global level and local level. In the global level, it puts all event types in a single SQL Table. But there's also a way to send each event type to a different table. You can use both of them at the same time. I've highlighted those sections in code, and hopefully, it will be apparent to you on how to use it properly. You have to define SqlTableMapping or don't. If you define, SqlTableMapping PSWinReporting will try to match fields reported to the one in the table. If the SQL Table doesn't exist it will create it based on that. If you don't define SQLTableMapping it will take defaults and build it for you. Feel free to experiment.
The other mode is for monitoring events live as they happen. I won't bore you here on how to set it up because it has already been described before – just go to PSWinReporting PowerShell module page and read the links, information. Again the focus here is to have last, fully working configuration to send events to SQL.
# Collects all named paramters (all others end up in $Args)
param(
$eventid = 4729,
$eventRecordID = 7488468, # 425358 ,
$eventChannel,
$eventSeverity
)
$ReportOptions = @{
JustTestPrerequisite = $false # runs testing without actually running script
AsExcel = $false # attaches Excel to email with all events, required ImportExcel module
AsCSV = $false # attaches CSV to email with all events,
AsHTML = $true # puts exported data into email directly with all events
SendMail = $false
OpenAsFile = $true # requires AsHTML set to $true
KeepReports = $true # keeps files after reports are sent (only if AssExcel/AsCSV are in use)
KeepReportsPath = 'C:\Support\Reports\ExportedEvents' # if empty, temp path is used
FilePattern = 'Evotec-ADMonitoredEvents-<currentdate>.<extension>'
FilePatternDateFormat = 'yyyy-MM-dd-HH_mm_ss'
DisplayConsole = @{
ShowTime = $true
LogFile = ''
TimeFormat = 'yyyy-MM-dd HH:mm:ss'
}
Debug = @{
DisplayTemplateHTML = $false
Verbose = $true
}
Notifications = @{
MicrosoftTeams = @{
Use = $true
TeamsID = 'https://outlook.office.com/webhook/f0a1728bf5-4.....8'
}
Slack = @{
Use = $false
Channel = '#general'
Uri = ""
}
MSSQL = @{
Use = $true
SqlServer = 'EVOWIN'
SqlDatabase = 'SSAE18'
SqlTable = 'dbo.[Events]'
# Left side is data in PSWinReporting. Right Side is ColumnName in SQL
# Changing makes sense only for right side...
SqlTableCreate = $true
SqlTableAlterIfNeeded = $true
SqlCheckBeforeInsert = 'EventRecordID', 'DomainController' # Based on column name
SqlTableMapping = [ordered] @{
'Event ID' = 'EventID,[int]'
'Who' = 'EventWho'
'When' = 'EventWhen,[datetime]'
'Record ID' = 'EventRecordID,[bigint]'
'Domain Controller' = 'DomainController'
'Action' = 'Action'
'Group Name' = 'GroupName'
'User Affected' = 'UserAffected'
'Member Name' = 'MemberName'
'Computer Lockout On' = 'ComputerLockoutOn'
'Reported By' = 'ReportedBy'
'SamAccountName' = 'SamAccountName'
'Display Name' = 'DisplayName'
'UserPrincipalName' = 'UserPrincipalName'
'Home Directory' = 'HomeDirectory'
'Home Path' = 'HomePath'
'Script Path' = 'ScriptPath'
'Profile Path' = 'ProfilePath'
'User Workstation' = 'UserWorkstation'
'Password Last Set' = 'PasswordLastSet,[datetime]'
'Account Expires' = 'AccountExpires,[datetime]'
'Primary Group Id' = 'PrimaryGroupId'
'Allowed To Delegate To' = 'AllowedToDelegateTo'
'Old Uac Value' = 'OldUacValue'
'New Uac Value' = 'NewUacValue'
'User Account Control' = 'UserAccountControl'
'User Parameters' = 'UserParameters'
'Sid History' = 'SidHistory'
'Logon Hours' = 'LogonHours'
'OperationType' = 'OperationType'
'Message' = 'Message'
'Backup Path' = 'BackupPath'
'Log Type' = 'LogType'
'AddedWhen' = 'EventAdded,[datetime],null' # ColumnsToTrack when it was added to database and by who / not part of event
'AddedWho' = 'EventAddedWho' # ColumnsToTrack when it was added to database and by who / not part of event
'Gathered From' = 'GatheredFrom'
'Gathered LogName' = 'GatheredLogName'
}
}
}
Backup = @{
Use = $false
DestinationPath = 'E:\EventLogs'
}
}
$ReportDefinitions = @{
TimeToGenerate = $false
ReportsAD = @{
Servers = @{
ForwardServer = $env:COMPUTERNAME
ForwardEventLog = 'ForwardedEvents'
}
EventBased = @{
UserChanges = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4720, 4738
LogName = 'Security'
IgnoreWords = ''
}
UserStatus = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4722, 4725, 4767, 4723, 4724, 4726
LogName = 'Security'
IgnoreWords = @{
'Domain Controller' = ''
'Action' = ''
'User Affected' = 'Win-*', '*AD1$*'
'Who' = ''
'When' = ''
'Event ID' = ''
'Record ID' = ''
}
ExportToSql = @{
# per Event Category / Global SQL is above
Use = $true
SqlServer = 'EVOWIN'
SqlDatabase = 'SSAE18'
SqlTable = 'dbo.[EventsUserStatus]'
# Left side is data in PSWinReporting. Right Side is ColumnName in SQL
# Changing makes sense only for right side...
SqlTableCreate = $true
SqlTableAlterIfNeeded = $false # if table mapping is defined doesn't do anything
SqlCheckBeforeInsert = 'EventRecordID', 'DomainController' # Based on column name
SqlTableMapping = [ordered] @{
'Event ID' = 'EventID,[int]'
'Who' = 'EventWho'
'When' = 'EventWhen,[datetime]'
'Record ID' = 'EventRecordID,[bigint]'
'Domain Controller' = 'DomainController'
'Action' = 'Action'
'Group Name' = 'GroupName'
'User Affected' = 'UserAffected'
'Member Name' = 'MemberName'
'Computer Lockout On' = 'ComputerLockoutOn'
'Reported By' = 'ReportedBy'
'SamAccountName' = 'SamAccountName'
'Display Name' = 'DisplayName'
'UserPrincipalName' = 'UserPrincipalName'
'Home Directory' = 'HomeDirectory'
'Home Path' = 'HomePath'
'Script Path' = 'ScriptPath'
'Profile Path' = 'ProfilePath'
'User Workstation' = 'UserWorkstation'
'Password Last Set' = 'PasswordLastSet,[datetime]'
'Account Expires' = 'AccountExpires,[datetime]'
'Primary Group Id' = 'PrimaryGroupId'
'Allowed To Delegate To' = 'AllowedToDelegateTo'
'Old Uac Value' = 'OldUacValue'
'New Uac Value' = 'NewUacValue'
'User Account Control' = 'UserAccountControl'
'User Parameters' = 'UserParameters'
'Sid History' = 'SidHistory'
'Logon Hours' = 'LogonHours'
'OperationType' = 'OperationType'
'Message' = 'Message'
'Backup Path' = 'BackupPath'
'Log Type' = 'LogType'
'AddedWhen' = 'EventAdded,[datetime],null' # ColumnsToTrack when it was added to database and by who / not part of event
'AddedWho' = 'EventAddedWho' # ColumnsToTrack when it was added to database and by who / not part of event
# 'Gathered From' = 'GatheredFrom'
# 'Gathered LogName' = 'GatheredLogName'
}
}
}
UserLockouts = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4740
LogName = 'Security'
IgnoreWords = ''
}
UserLogon = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 4624
LogName = 'Security'
IgnoreWords = ''
}
UserLogonKerberos = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 4768
LogName = 'Security'
IgnoreWords = ''
}
GroupMembershipChanges = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4728, 4729, 4732, 4733, 4756, 4757, 4761, 4762
LogName = 'Security'
IgnoreWords = @{
'Who' = '*ANONYMOUS*'
}
ExportToSql = @{
# per Event Category / Global SQL is above
Use = $true
SqlServer = 'EVOWIN'
SqlDatabase = 'SSAE18'
SqlTable = 'dbo.[EventsGroupMembershipChanges]'
# Left side is data in PSWinReporting. Right Side is ColumnName in SQL
# Changing makes sense only for right side...
SqlTableCreate = $true
SqlTableAlterIfNeeded = $false # if table mapping is defined doesn't do anything
SqlCheckBeforeInsert = 'EventRecordID', 'DomainController' # Based on column name
}
}
GroupCreateDelete = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4727, 4730, 4731, 4734, 4759, 4760, 4754, 4758
LogName = 'Security'
IgnoreWords = @{
'Who' = '*ANONYMOUS*'
}
}
GroupPolicyChanges = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 5136, 5137, 5141
LogName = 'Security'
IgnoreWords = ''
}
LogsClearedSecurity = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 1102
LogName = 'Security'
IgnoreWords = ''
}
LogsClearedOther = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 104
LogName = 'System'
IgnoreWords = ''
}
EventsReboots = @{
Enabled = $false
EnabledSqlGlobal = $true
Events = 1001, 1018, 1, 12, 13, 42, 41, 109, 1, 6005, 6006, 6008, 6013
LogName = 'System'
IgnoreWords = ''
}
ComputerCreatedChanged = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4741, 4742 # created, changed
LogName = 'Security'
IgnoreWords = ''
}
ComputerDeleted = @{
Enabled = $true
EnabledSqlGlobal = $true
Events = 4743 # deleted
LogName = 'Security'
IgnoreWords = ''
}
}
}
}
Import-Module PSWinReporting -Force
Import-Module DBATools
Import-Module PSSharedGoods
Import-Module PSSlack
Import-Module PSTeams
$startNotificationsSplat = @{
EventChannel = $EventChannel
EventID = $EventID
ReportDefinitions = $ReportDefinitions
ReportOptions = $ReportOptions
EventRecordID = $EventRecordID
}
Start-Notifications @startNotificationsSplatThe significant bit is to make sure you only use Import-Module for those you want to load. Each module is about 250ms to 1-2 seconds of load time which during massive hours can add up. If you're not sending stuff to SQL or Slack, make sure to disable that functionality and remove Import-Module for the related module. Some of those modules you need to get separately from PowerShellGallery.
There is one more thing to this module. There is function helper which is able to set up forwarding for you. It adds all events that are defined to all Domain Controllers found in Forest. It requires COMPUTER which is Event Log Server to be added to Event Log Readers in Domain for it to work properly.
Import-Module PSWinReporting.psd1 -Force
Import-Module PSSharedGoods #-Force
$ReportDefinitions = @{
ReportsAD = @{
Servers = @{
Automatic = $true
OnlyPDC = $false
DC = ''
}
EventBased = @{
UserChanges = @{
Enabled = $true
Events = 4720, 4738
LogName = 'Security'
}
UserStatus = @{
Enabled = $true
Events = 4722, 4725, 4767, 4723, 4724, 4726
LogName = 'Security'
}
ComputerCreatedChanged = @{
Enabled = $true
Events = 4741, 4742 # created, changed
LogName = 'Security'
IgnoreWords = ''
}
ComputerDeleted = @{
Enabled = $true
Events = 4743 # deleted
LogName = 'Security'
IgnoreWords = ''
}
UserLockouts = @{
Enabled = $true
Events = 4740
LogName = 'Security'
}
GroupMembershipChanges = @{
Enabled = $true
Events = 4728, 4729, 4732, 4733, 4756, 4757, 4761, 4762
LogName = 'Security'
}
GroupCreateDelete = @{
Enabled = $true
Events = 4727, 4730, 4731, 4734, 4759, 4760, 4754, 4758
LogName = 'Security'
}
GroupPolicyChanges = @{
Enabled = $true
Events = 5136, 5137, 5141
LogName = 'Security'
}
LogsClearedSecurity = @{
Enabled = $true
Events = 1102, 1105
LogName = 'Security'
}
LogsClearedOther = @{
Enabled = $true
Events = 104
LogName = 'System'
}
}
}
}
# This is required if script is not run as admin. It will open up this script as Admin
if (!([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) {
Start-Process powershell.exe "-NoProfile -ExecutionPolicy Bypass -File `"$PSCommandPath`"" -Verb RunAs
exit
}
Start-SubscriptionService
$Providers = New-SubscriptionTemplates -ReportDefinitions $ReportDefinitions
Set-SubscriptionTemplates -ListTemplates $Providers -DeleteOwn
#
Read-Host -Prompt "Press any key to continue" Hope this little script will help you set up forwarding. Of course, you can do this manually, but it does save some effort.
PSWinReporting 2.X (New Hope) is slowly coming. It currently lives as a preview in PowerShellGallery and on GitHub, there are examples on how to use it. It has some bugs, and some things don't work as I expect it to, but if you're feeling adventurous feel free to explore. It's important to know that when New Hope reaches it's time and will land in the stable channel, there will be no more possible for me to apply fixes to Legacy Edition on PSGallery as it will only have New Hope. If I release any fixes (if needed), those will be applied to Legacy branch on GitHub. It's a fair warning. If you use auto-update on PSGallery modules, you should disable it, or it will break your existing setup once New Hope becomes stable. To give you a little preview of what new version will bring…
Console Command – command that has similar functionality as the main module but now it allows you to play with it interactively
Dynamic HTML – you already saw it in Statusimo and it's using PSWriteHTML. It can nicely resize tables and is even readable on a phone. Supports most major browsers. It's able to generate Excel, CSV, and PDF directly from the HTML part. I may add some Charts to it to make it pretty. Just for you 😉
Finally, it's no longer Domain Controller monitoring only, but you will be able to use it for ADConnect, Hyper-V, whatever. You will be able to define your reports, or I can help you do so with your help (I am not Hyper-V expert so knowing which event matter and what should be monitored needs to be provided to me). You will also be able to translate or rename any fields. As you see on screenshots, every single column from those reports can now be changed to something else, removed or otherwise mangled. And that's just part of what's coming. You will have to wait a bit longer, but there were significant changes done to it. Ever wanted to send events to different events to different teams, slack channels? Send an email in the next 5 seconds if someone is added to Domain Admins groups? Well, that's coming!
This post was last modified on May 6, 2019 08:41
Today, I made the decision to upgrade my test environment and update the version of…
Have you ever looked at your Active Directory and wondered, "Why do I still have…
Active Directory replication is a critical process that ensures the consistent and up-to-date state of…
Hey there! Today, I wanted to introduce you to one of the small but excellent…
Active Directory (AD) is crucial in managing identities and resources within an organization. Ensuring its…
In today's digital age, the ability to create compelling and informative HTML reports and documents…
